hanson pressure tanks


HOT WATER STORAGE TANKS
STANDARD HORIZONTAL EPOXY LINED
WITH OPTIONAL R16 FOAM INSULATION


MOST OF OUR TANKS CAN ALSO BE BUILT IN STAINLESS STEEL USING IN-STOCK MATERIAL - PLEASE INQUIRE


BUILT TO ORDER IN 3 - 4 WEEKS

Horizontal Water Tanks
IMPORTANT: Operating temperatures near the 180 ºF maximum can shorten service life. We recommend an upgrade to a glass lined tank if this is likely.

STANDARD HOT WATER TANKS
TECHNICAL SPECIFICATIONS

These Hanson lined potable hot water storage tanks are built and tested in accordance with the A.S.M.E. Boiler and Pressure Vessel Code Section IV for potable hot water storage tanks and bear the "HLW" stamp, and serial number, national board number as required. A copy of the A.S.M.E. data sheet HLW-6, signed by an A.S.M.E. authorized inspector, will be sent with the invoice if requested at time of order.

Standard exterior paint system is power buff to SSPC-SP3 plus one coat 2/3 MIL DFT rust resistant primer. Standard interior finishes are porcelain enamel, aka "GLASS", epoxy or cement.

All tappings and flange openings are plugged and covered before shipment. Manway covers are installed for shipping only, and must be adjusted and tightened before the tank is pressurized.

Sacrificial magnesium alloy anodes are shipped loose with all glass lined tanks for installation at the jobsite. These must be checked periodically in service and replaced if necessary to protect the tank lining.

The A.S.M.E. name plate and the supplied lift lugs are installed to allow clearance for tank insulation, which is available at extra cost.

Water storage tanks are guaranteed free from defects in material and workmanship for one year from the date of shipment, FOB our factory. Full limited warranty terms are available on request.

GALLS

SIZE

WT#

SQ.FT

DRAWING / PART#

NET PRICE

FOAM INSUL

ORDER NOW

JPG format

PDF format

140

30" x 52"

360#

41

ES-30-140-H ES-30-140-H

$ 3,854.00

$ 525.00

ES-30-140-H

180

30" x 64"

391#

44

ES-30-180-H ES-30-180-H

$ 4,004.00

$ 554.00

ES-30-180-H

235

30" x 84"

524#

58

ES-30-235-H ES-30-235-H

$ 4,194.00

$ 758.00

ES-30-235-H

270

30" x 95"

543#

66

ES-30-270-H ES-30-270-H

$ 4,559.00

$ 851.00

ES-30-270-H

305

36" x 77"

606#

65

ES-36-305-H ES-36-305-H

$ 4,473.00

$ 861.00

ES-30-270-H

335

36" x 84"

607#

71

ES-36-335-H ES-36-335-H

$ 4,622.00

$ 922.00

ES-36-335-H

400

36" x 99"

730#

82

ES-36-400-H ES-36-400-H

$ 4,919.00

$ 1,049.00

ES-36-400-R

534

42" x 96"

885#

94

ES-42-534-H ES-42-534-H

$ 5,661.00

$ 1,204.00

ES-42-534-H

660

42" x 120"

1063#

116

ES-42-660-H ES-42-660-H

$ 6,535.00

$ 1,443.00

ES-42-660-H

712

48" x 100"

1161#

113

ES-48-712-H ES-48-712-H

$ 7,886.00

$ 1,436.00

ES-48-712-H

800

48" x 111"

1270#

125

ES-48-800-H ES-48-800-H

$ 8,366.00

$ 1,566.00

ES-48-800-H

900

48" x 123"

1368#

137

ES-48-900-H ES-48-900-H

$ 8,779.00

$ 1,698.00

ES-48-900-H

1080

48" x 148"

1600#

162

ES-48-1080-H ES-48-1080-H

$ 10,124.00

$ 1,978.00

ES-48-1080-H

1225

54" x 134"

1924#

168

ES-54-1225-H ES-54-1225-H

$ 11,440.00

$ 2,043.00

ES-48-1080-H

1450

60" x 128"

2000#

182

ES-60-1450-H ES-60-1450-H

$ 12,755.00

$ 2,240.00

ES-48-1450-H

1650

64" x 130"

2371#

197

ES-64-1650-H ES-64-1650-H

$ 16,535.00

$ 2,426.00

ES-64-1650-H

1950

72" x 123"

2805#

215

ES-72-1950-H ES-72-1950-H

$ 16,414.00

$ 2,655.00

ES-72-1950-H

2150

72" x 135"

3009#

232

ES-72-2150-H ES-72-2150-H

$ 18,302.00

$ 2,843.00

ES-72-2150-H

Standard styles can be modified at nominal cost. The part# will change. If the capacity or working pressure you need is not listed, contact us for a prompt quotation. As well as ASME, we can meet other domestic and international codes such as ABS, USCG, Canadian, Lloyds and DNV.
DRAWINGS ARE UPDATED TO CURRENT A.S.M.E. DATE FOR NEW ORDERS
air receivers