hanson pressure tanks


HOT WATER STORAGE TANKS
STANDARD VERTICAL CEMENT LINED

MOST OF OUR TANKS CAN ALSO BE BUILT IN STAINLESS STEEL USING IN-STOCK MATERIAL - PLEASE INQUIRE


NON-STOCK TANKS ARE BUILT TO ORDER IN 3 - 4 WEEKS


Vertical Water Tanks
IMPORTANT: Operating temperatur rating 210 ºF maximum.
Cement lining adds 5 lbs/ft2 to the shipping weight.

STANDARD HOT WATER TANKS
TECHNICAL SPECIFICATIONS


These Hanson lined potable hot water storage tanks are built and tested in accordance with the A.S.M.E. Boiler and Pressure Vessel Code Section IV for potable hot water storage tanks and bear the "HLW" stamp, and serial number, national board number as required. A copy of the A.S.M.E. data sheet HLW-6, signed by an A.S.M.E. authorized inspector, will be sent with the invoice if requested at time of order.

Standard exterior paint system is power buff to SSPC-SP3 plus one coat 2/3 MIL DFT rust resistant primer. Standard interior finishes are porcelain enamel, aka "GLASS", epoxy or cement.

All tappings and flange openings are plugged and covered before shipment. Manway covers are installed for shipping only, and must be adjusted and tightened before the tank is pressurized.

Sacrificial magnesium alloy anodes are shipped loose with all glass lined tanks for installation at the jobsite. These must be checked periodically in service and replaced if necessary to protect the tank lining.

The A.S.M.E. name plate and the supplied lift lugs are installed to allow clearance for tank insulation, which is available at extra cost.

Water storage tanks are guaranteed free from defects in material and workmanship for one year from the date of shipment, FOB our factory. Full limited warranty terms are available on request.

GALLS

SIZE

WT#

SQ.FT

DRAWING / PART#

NET PRICE

FOAM INSUL

ORDER NOW

JPG format

PDF format

305

36" x 77"

1023#

65

CS-36-305-V CS-36-305-V

$ 5,985.00

$ 862.00

CS-36-305-V

335

36" x 84"

1098#

71

CS-36-335-V CS-36-335-V

$ 6,272.00

$ 922.00

CS-36-335-V

360

36" x 88"

1145#

74

CS-36-360-V CS-36-360-V

$ ENQUIRE

$ 957.00

GET QUOTE

400

36" x 99"

1394#

99

CS-36-400-V CS-36-400-V

$ 6,840.00

$ 1,256.00

CS-36-400-V

460

36" x 113"

1472#

94

CS-36-460-V CS-36-460-V

$ 7,634.00

$ 1,079.00

CS-42-460-V

462

42" x 84"

1450#

83

CS-42-462-V CS-42-462-V

$ 7,394.00

$ 1,079.00

CS-42-462-V

534

42" x 96"

1558#

94

CS-42-534-V CS-42-534-V

$ 7,988.00

$ 1,208.00

CS-42-534-V

660

42" x 120"

1898#

116

CS-42-660-V CS-42-660-V

$ 9,150.00

$ 1,443.00

CS-42-660-V

585

48" x 83"

1695#

95

CS-48-585-V CS-48-585-V

$ 9,139.00

$ 1,436.00

CS-48-585-V

712

48" x 100"

1986#

113

CS-48-712-V CS-48-712-V

$ 10,102.00

$ 1,436.00

CS-48-712-V

800

48" x 111"

2171#

125

CS-48-800-V CS-48-800-V

$ 10,725.00

$ 1,569.00

CS-48-800-V

900

48" x 122"

2384#

137

CS-48-900-V CS-48-900-V

$ 11,573.00

$ 1,698.00

CS-48-900-V

1040

54" x 115"

2813#

146

CS-54-1040-V CS-54-1040-V

$ 12,726.00

$ 1,825.00

CS-54-1040-V

1225

56" x 127"

2993#

166

CS-56-1225-V CS-56-1225-V

$ 15,474.00

$ 2,050.00

CS-56-1225-V

1450

60" x 130"

3419#

185

CS-60-1450-V CS-60-1450-V

$ 16,609.00

$ 2,277.00

CS-60-1450-V

1650

64" x 130"

3764#

197

CS-64-1650-V CS-64-1650-V

$ 19,296.00

$ 2,428.00

CS-64-1650-V

1950

72" x 123"

4205#

213

CS-72-1950-V CS-72-1950-V

$21,702.00

$ 2,638.00

CS-72-2150-V

2150

72" x 135"

4543#

213

CS-72-2150-V CS-72-2150-V

$ 22,093.00

$ 2,638.00

CS-72-2150-V

Standard styles can be modified at nominal cost. The part# will change. If the capacity or working pressure you need is not listed, contact us for a prompt quotation. As well as ASME, we can meet other domestic and international codes such as ABS, USCG, Canadian, Lloyds and DNV.
DRAWINGS ARE UPDATED TO CURRENT A.S.M.E. DATE FOR NEW ORDERS
air receivers